C-Fiber 780
飞秒掺铒激光器

Menlo_Systems_Femtosecond_Fiber_Laser_C Fiber 780_2018 05 08_3w

Specifications

先进的功能和优点

- 高稳定性
- 低的幅度和相位噪声
- 全保偏光纤方案
- 单一锁模状态
- Menlo Figure 9^®技术，60秒内快速启动
- 1560 nm的辅助输出
- 重复频率50-250 MHz

	C-Fiber 780	C-Fiber 780 HIGH POWER
中心波长	780 nm ± 10nm	780 nm ± 10nm
平均功率	>100 mW	>250 mW
脉冲能量	>1.0 nJ	>2.5 nJ
脉冲宽度	<100 fs（<70 fs若选用FEMTOSCALE）	<100 fs（<70 fs若选用FEMTOSCALE）
重复频率*	100 MHz (50-250 MHz with VARIO)	100 MHz (50-250 MHz with VARIO)
重复频率不稳定度	<1 ppm超过20小时，恒温环境测量	<1 ppm超过20小时，恒温环境测量
时间抖动	<2 fs [rms, 10 kHz.. 1 MHz]	<2 fs [rms, 10 kHz.. 1 MHz]
输出端口	自由空间	自由空间
辅助输出端口**	自由空间，1560 nm，> 250 mW	自由空间，1560 nm，> 500 mW
额外的种子光源光纤耦合输出端口数	1个（使用MULTIBRANCH最多4个）	1个（使用MULTIBRANCH最多4个）
偏振	线性，S极化	线性，S极化
光束高度	75 mm	75 mm

*如需特定的平均功率，脉冲宽度和重复率，欢迎咨询。**用户能够在780 nm和1560 nm之间切换（可以以任意比例分配功率）。

Description

Menlo Systems公司的飞秒光纤激光器将最新的光纤技术成果集成到易用的产品

中。Menlo Systems公司独有的figure 9^®设计使产品能够重复和长期稳定的运行。该

设计基于成熟的非线性光纤环形镜（NOLM）锁模机制。振荡器和放大器全部使

用保偏光纤元件来保证激光器优良的稳定性和在低噪声下运行。用于产生780

nm激光的二次谐波产生单元是一个高效率，具有最优性能的模块。该激光器无

需维护，可自行安装并且激光器只需按下按钮即可使用。您可以参考我们提供

的功能选项来定制合适的激光器以满足您的应用需求。

Options

SYNC100 Repetition Rate Synchronization

Product Code: SYNC100

Tunable cavity length by high-bandwidth piezo-controlled synchronization
RRE-SYNCRO Repetition Rate Stabilization

Product Code: RRE-SYNCRO
Feedback electronics to phase lock pulses to an external clock (see product page for more details)
All-in-one synchronization solution: laser and synchronization electronics all components from one supplier: full automation for hands off operation, integrated and tested for an immediate start. → best performance with more time for your experiments!
Synchronization: Laser to reference
Relative Phase Noise between stabilized laser and 10 MHz reference:
RMS Timing Jitter: <200 fs [0.1 Hz–500 kHz] or same as reference, whichever applies first
Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 1 MHz]

Synchronization: Laser to laser
Relative Phase Noise between two lasers in master-slave configuration
RMS Timing Jitter down to <20 fs [0.1 Hz–500 kHz] for Menlo fs lasers as master/slave with small locking bandwidth
Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 1 MHz]
VARIO User-Defined Repetition Rate

Product Code: VARIO

Factory-set value selectable in the 50-100 MHz range
MULTIBRANCH Additional Seed Ports

Product Code: MULTIBRANCH

Seeding of multiple amplifiers with optional subsequent frequency conversion to cover multiple wavelengths
FEMTOSCALE Additional Compression Unit

Product Code: FEMTOSCALE

Compression of second harmonic output pulse length to <70 fs