C-Fiber
飞秒掺铒激光器

Menlo_Systems_Femtosecond_Fiber_Laser_C Fiber_2018 05 08_3w

Specifications

先进的功能和优点

- 高稳定性
- 低的幅度和相位噪声
- 全保偏光纤方案
- 单一锁模状态
- Menlo Figure^9®技术，60秒内快速启动
- 重复频率50-250 MHz
- 出色的性价比
- 紧凑的设计

	C-Fiber	C-Fiber High Power
中心波长	1560 nm ± 20 nm	1560 nm ± 20 nm
平均功率*	>100 mW	>500 mW
脉冲能量*	>1.0 nJ	>5.0 nJ
脉冲宽度	<90 fs	<90 fs
重复频率	100 MHz (50-250 MHz，若选用 VARIO)	100 MHz (50-250 MHz，若选用 VARIO)
重复频率不稳定度	<1 ppm超过20小时，恒温环境测量	<1 ppm超过20小时，恒温环境测量
时间抖动	<2 fs [rms, 10 kHz.. 1 MHz]	<2 fs [rms, 10 kHz.. 1 MHz]
输出端口	光纤耦合（FC / APC）	自由空间
偏振	线性，保偏光纤	线性，S极化
光束高度		102 mm

*如需特定的平均功率，脉冲宽度和重复频率，欢迎咨询。

Description

Menlo Systems公司的飞秒光纤激光器将最新的光纤技术成果集成到易用的产品中。Menlo Systems公司独有的figure 9^®设计使产品能够重复和长期稳定的运行。该设计基于成熟的非线性光纤环形腔镜（NOLM）锁模机制。振荡器和放大器全部使用保偏光纤元件来保证激光器优良的稳定性和在低噪声下运行。该激光器免维护，可自行安装且一键输出。您可以参考我们提供的功能选项来定制合适的激光器以满足您的应用需求。

Options

SYNC100 Repetition Rate Synchronization

Product Code: SYNC100

Tunable cavity length by high-bandwidth piezo-controlled synchronization
RRE-SYNCRO Repetition Rate Stabilization

Product Code: RRE-SYNCRO
Feedback electronics to phase lock pulses to an external clock (see product page for more details)
All-in-one synchronization solution: laser and synchronization electronics all components from one supplier: full automation for hands off operation, integrated and tested for an immediate start. → best performance with more time for your experiments!
Synchronization: Laser to reference
Relative Phase Noise between stabilized laser and 10 MHz reference:
RMS Timing Jitter: <200 fs [0.1 Hz–500 kHz] or same as reference, whichever applies first
Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 1 MHz]

Synchronization: Laser to laser
Relative Phase Noise between two lasers in master-slave configuration
RMS Timing Jitter down to <20 fs [0.1 Hz–500 kHz] for Menlo fs lasers as master/slave with small locking bandwidth
Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 1 MHz]
VARIO User-Defined Repetition Rate

Product Code: VARIO

Factory-set value selectable in the 50-100 MHz range
MULTIBRANCH Additional Seed Ports

Product Code: MULTIBRANCH

Seeding of multiple amplifiers with optional subsequent frequency conversion to cover multiple wavelengths