orange
Femtosecond Ytterbium Laser

Spezifikationen

Advanced Features and Benefits

>10 W with <200 fs or >1W with <150fs
SHG 520 nm Option
High Stability
Low Amplitude and Phase Noise
Repetition Rate 50-250 MHz
Single Mode-Lock State
figure 9^® Technology, Laser Output in Less than 60 Seconds

	orange	orange HIGH POWER	orange HIGH POWER 10
Central Wavelength	1040 nm ± 10 nm	1040 nm ± 10 nm	1040 nm ± 10nm
Average Power	>100 mW	>1 W	>10 W
Pulse Energy	>1 nJ	>10 nJ	>100 nJ
Pulse Width*	<150 fs	<150 fs	<200 fs
Repetition Rate**	100 MHz (50-250 MHz with VARIO)	100 MHz (50-250 MHz with VARIO)	100 MHz (50-250 MHz with VARIO)
Repetition Rate Instability	<1 ppm over 90 hours at constant temperature	<1 ppm over 90 hours at constant temperature	<1 ppm over 90 hours at constant temperature
Output Port	free space	free space	free space
Auxiliary Output Port	optional	optional	optional
Additional Fiber-Coupled Seed Port	1 (up to 4 with MULTIBRANCH)	1 (up to 4 with MULTIBRANCH)	1 (up to 4 with MULTIBRANCH)
Polarization	linear, p-polarized	linear, p-polarized	linear, p-polarized
Beam Height	95 mm	95 mm	95 mm
SECOND HARMONIC MODULE		SHG 520
Average Power		>400 mW
Pulse Width		<150 fs
Polarization		linear, p-polarized

*Please inquire about chirped output pulses for pulse length from 1-50 ps. **Please inquire for your specific combinations of average power, pulse duration and repetition rate.

Beschreibung

Menlo Systems’ femtosecond Yb fiber-based laser sources now offer more than 10 W in average power with a pulse duration of <200 fs. Based on our unique figure 9^® design, the lasers offer reproducible and long-term stable operation. Both oscillator and amplifier use polarization maintaining (PM) fiber components only, ensuring excellent stability and low-noise operation. The second harmonic generation is a highly efficient module for maximum performance. The laser is maintenance free, user installed and ready to use at the press of a single button. Customize your laser with the available options to match the requirements of your application.

Optionen

CHIRPED PULSES

Product Code: CHIRPED PULSES

Picosecond pulses for seeding applications
SYNC100 Repetition Rate Synchronization

Product Code: SYNC100

Tunable cavity length by high-bandwidth piezo-controlled synchronization
RRE-SYNCRO Repetition Rate Stabilization

Product Code: RRE-SYNCRO
Feedback electronics to phase lock pulses to an external clock (see product page for more details)
All-in-one synchronization solution: laser and synchronization electronics all components from one supplier: full automation for hands off operation, integrated and tested for an immediate start. → best performance with more time for your experiments!
Synchronization: Laser to reference
Relative Phase Noise between stabilized laser and 10 MHz reference:
RMS Timing Jitter: <200 fs [0.1 Hz–500 kHz] or same as reference, whichever applies first
Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 1 MHz]

Synchronization: Laser to laser
Relative Phase Noise between two lasers in master-slave configuration
RMS Timing Jitter down to <20 fs [0.1 Hz–500 kHz] for Menlo fs lasers as master/slave with small locking bandwidth
Integrated timing jitter of free running laser: <2 fs [rms, 10 kHz.. 1 MHz]
VARIO User-Defined Repetition Rate

Product Code: VARIO

Factory-set value selectable in the 50-100 MHz range
MULTIBRANCH Additional Seed Ports

Product Code: MULTIBRANCH

Seeding of multiple amplifiers with optional subsequent frequency conversion to cover multiple wavelengths
SHG 520 Second Harmonic Generation

Product Code: SHG 520

Frequency doubling to 520 nm